Manual Sandblasting Machine, High-Pressure Sandblasting Machine Manufacturer, Sandblasting Tank Mold, Sandblasting Surface Rust Removal and Cleaning Treatment

• Model NO.: 9080
• HS Code: 8424300000
• Production Capacity: 5000

Product Description

CABINET type HIGH pressure sandblasting machine series

Features:
Sandblasting machine is mainly used in electroplating, paint, coating area to-be-covered before piating; Old way of refurbished cleaning; Metal products and plastic, crystal, glass surface trace eliminate scattered, dumb, surface process to enhance the grade of the product's surface; Machining parts tiny burrs purify; Increase the metal surface hardness, eliminate stress such as spring, mechanical cutters, etc.; Metal and non-metai products surface etching pattern, writing and prevent slippery processing, such as marble, seals, and handle prevent slippery, etc. The machine is applied the range: applicable to small and medium-sized general of workpiece and high hardness workpieces quickly sandblasting. Such as engine fittings, valves, heat treatment workpiece, etc. This machine has novel, scientific design and reasonable structure, convenient operation, processing superior performance; Gush arenaceous speed, the impact point at deep. 

Applicable scope: electronic hardware class, ABS plastic, acrylic, resin, workpiece or handicraft sandblasting
Main technical parameters

Model	STR-9070	STR-9080	STR-1010	STR-1212
Internal size(mm)	900×700×790	900×800×700	1000×1000×670	1180×1180×980
Complete machine size(mm)	900×700×1780	950×850×1720	1000×1000×2100	1200×1200×2580
Dedust box sizes(mm)	600×600×1680	600×600×1680	600×600×1680	800×800×1780
Power	220V 50Hz	220V 50Hz	220V 50Hz	220V 50Hz
Machine floodlight	220V 20W	220V 20W	220V 20W	220V 20W
Separator motor	220V 50Hz  0.55-3KW	220V 50Hz  0.55	220V 50Hz  0.55-3KW	220V 50Hz  0.55-3KW
Separator air volume	8.5m3/min	8.5m3/min	8.5m3/min	8.5m3/min
Compressed air source	2-8bar(kg/cm2)	2-8bar(kg/cm2)	2-8bar(kg/cm2)	2-8bar(kg/cm2)
Weight	380kg	380kg	400kg	380kg

 

How should the machine be maintained?
1. Clean the dust on time every day, every 4 hours: normally
Once in the afternoon, once in the afternoon, and cleaned twice a day. 2. Check the wear of various parts from time to time, especially some wearing parts